Prevac MG15 - Remote Control; Modbus RTU and TCP Remote Control Module; Pro Inet Remote Control Module (Option)

INSTALLATION MULTI GAUGE CONTROLLER
2.5.3 REMOTE CONTROL
The device is equipped with the following interfaces:
• Serial RS232/RS485 (Selected in menu),
• Ethernet (compliant with IEEE 802),
• ProiNet (option).
Figure 2.6: Modbus RTU and TCP remote control module
Figure 2.7: ProiNet remote control module (option)
The parameters of the device can be read via the remote control interfaces at any time. To con-
trol/set the parameters switch the device in the remote control mode.
Detailed description of the connections - see ig. 6.3, 6.4 or 6.5.
The coniguration of the remote control interfaces is shown in chapter 6.
Page 26 User manual rev. 03