MULTI GAUGE CONTROLLER OPERATION
5. The current settings will be saved in the selected slot under the chosen name.
Saved device coniguration can be restored also in the Setup menu. To load the previously saved
settings:
1. Enter Setup Menu →Save/Load →Save.
2. Choose one of the slots on the list from which device settings will be loaded and click on it.
3. The selected device settings will be loaded.
Default factory settings may also be loaded as follows:
1. Enter Setup Menu →Save/Load →Save.
2. Choose Load Default to load the factory settings.
3.6.13 INFORMATION MENU
To display the information about the device go to:
Setup Menu →Information.
This menu contains information about the device name and version, the current software version,
as well as the network parameters such as IP address, netmask and default gateway.
3.6.14 LOGS MENU
To display the history log go to: Setup Menu →Logs.
This submenu displays the error history log. The displayed list of errors includes the description
and date of their occurrence.
3.6.15 REBOOT
Restart the application running on the device. To restart the device enter the restart menu: Setup
Menu →Reboot.
User manual rev. 03 Page 73
To Next Page
Loading...