R&S RTC1000 - Page 139

Serial Bus Analysis
R&S
®
RTC1000
139User Manual 1335.7352.02 ─ 02
Figure 11-12: UART trigger menu page 2
START BIT
Sets the start bit as trigger event. The start bit is the first low bit after a stop bit.
FRAME START
Defines the first start bit after idle time (= frame start) as trigger condition.
SYMBOL <N>
Triggers on the Nth symbol in a frame.
ANY SYMBOL
Triggers on a symbol pattern anywhere within a frame. See "PATTERN INPUT"
on page 129.
PATTERN
Configures a data pattern of one or more symbols as trigger condition.
UART/RS-232 BUS (Option R&S RTC-K2)