R&S RTC1000 - Page 334

Remote Commands Reference
R&S
®
RTC1000
334User Manual 1335.7352.02 ─ 02
STATus:QUEStionable:MASK:CONDition?.......................................................................334
STATus:QUEStionable:ENABle.......................................................................................334
STATus:QUEStionable:COVerload:ENABle......................................................................334
STATus:QUEStionable:LIMit:ENABle...............................................................................334
STATus:QUEStionable:MASK:ENABle.............................................................................334
STATus:QUEStionable[:EVENt]?.....................................................................................335
STATus:QUEStionable:COVerload[:EVENt]?.................................................................... 335
STATus:QUEStionable:LIMit[:EVENt]?............................................................................. 335
STATus:QUEStionable:MASK[:EVENt]?...........................................................................335
STATus:QUEStionable:NTRansition................................................................................ 335
STATus:QUEStionable:COVerload:NTRansition............................................................... 335
STATus:QUEStionable:LIMit:NTRansition........................................................................ 335
STATus:QUEStionable:MASK:NTRansition...................................................................... 335
STATus:QUEStionable:PTRansition.................................................................................335
STATus:QUEStionable:COVerload:PTRansition................................................................335
STATus:QUEStionable:LIMit:PTRansition.........................................................................335
STATus:QUEStionable:MASK:PTRansition...................................................................... 335
STATus:PRESet
Resets all STATUS:QUESTIONALBLE registers.
Usage:
Event
STATus:QUEStionable:CONDition?
STATus:QUEStionable:COVerload:CONDition?
STATus:QUEStionable:LIMit:CONDition?
STATus:QUEStionable:MASK:CONDition?
Returns the contents of the CONDition part of the status register to check for question-
able instrument or measurement states. Reading the CONDition registers does not
delete the contents.
Return values:
<Condition> Condition bits in decimal representation
Range: 1 to 65535
Increment: 1
Usage: Query only
STATus:QUEStionable:ENABle <Enable>
STATus:QUEStionable:COVerload:ENABle <Enable>
STATus:QUEStionable:LIMit:ENABle <Enable>
STATus:QUEStionable:MASK:ENABle <Enable>
Sets the ENABle part that allows true conditions in the EVENt part to be reported in the
summary bit. If a bit is set to 1 in the enable part and its associated event bit transitions
to true, a positive transition occurs in the summary bit and is reported to the next
higher level.
Status Reporting