REXROTH EcoDrive Cs - Page 222

12-2 Index Rexroth EcoDrive Cs Drives
DOK-ECODR3-DKC**.3-CS*-PR02-EN-P
connection
braking resistor 5-8
choke 5-7
encoder 5-12
ground 5-11
holding brake 5-18
mains and supply voltage 6-1
motor 5-9
continuous current at standstill 8-7
continuous torque at standstill 8-7
control cabinet
construction 7-1
multiple line structure 7-2
wire routing 7-6
control circuits
for the mains connection 6-18
with E-Stop 6-19
control voltage
data 4-15
cooling ribs 8-43
cooling units 7-3
C-UL listing 4-17
cycle duration
motor 8-6
D
data
ambient and operating conditions (drive controllers) 4-7
ambient and operating conditions (motor) 8-25
electrical (drive controller) 4-9
mechanical (drive controller) 4-1
power section 4-9
technical data (motor) 8-6
DC24V NTM power supplies 10-26
degree of protection
motor 8-26
derating 4-12
device configurations 1-2
DeviceNet interface
with COMBICON connector 5-39
with sealed micro-style connector 5-41
diagnostic display 4-16
digital inputs 5-13
digital outputs 5-15
dimensional drawings
drive controller 4-1
DKC01.3 5-23
DKC02.3 5-31
DKC03.3 5-33
DKC05.3 5-43
DKC06.3 5-39
DKC16.3 5-41
DL1, DL2 5-7
drive address 4-16
drive controller
additional components 10-1
combination with motors 1-4
configuration 1-2
degree of protection 4-7
index 9-2
individual components 1-2
mass 4-6
materials 4-6
mounting position 7-1
serial number 9-2
technical data 4-1
type plate 9-1
weight 4-6
DST 10-30
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com