Ricoh B132 - Page 152

COVER INTERPOSER TRAY (B704)
B132/B200 1-106 SM
Prepare the Cover Interposer for the B706
1. Remove spacer [A] ( x1).
2. Attach spacer [B] ( x1).
3. Remove the screws from the connector casing [C] ( x2).
4. Push the connector casing in the direction of the arrow until the second set of
holes is aligned with the holes below, then attach the screws.
B706I900.WMF
[A]
[B]
[C]