SERVICE PROGRAM TABLES
B132/B200 5-28 SM
1108 Htg Roll Lamp 1 Heating Roller: Fusing Lamps
Controls the level of the power (percentage) supplied to the heating rollers (Watts)
when the machine is in the specified mode.
At Reload
During warmup after the machine is switched or returns from
and energy save mode.
Wait Time
While the machine is in the standby mode and ready for
operation.
Norm:1C Normal operation for black-and-white copying and printing.
Norm:FC Normal operation for full color copying and printing
Scan:Norm:1C Black-and-white scanning.
Scan:Norm:FC Full color scanning.
At ProCon Reload
Reload temperature after completing the process control
cycle.
Heating Roller: Fusing Lamp 1
001 At Reload [ 0~100 / 100 /0.1%]
002 Wait Time
003 Norm:1C
004 Norm:FC
Heating Roller: Fusing Lamp 2
005 Wait Time [ 0~1000 /0.1%]
006 Norm:1C [ 0~1000 / 1000 /0.1%]
007 Scan:Norm:1C [ 0~100 /0.1%]
008 Norm:FC
009 Scan:Norm:FC [ 0~1000 /0.1%]
Pressure Roller Fusing Lamp
010 At Reload [ 0~100 / 100 /0.1%]
011 At ProCon Reload [ 0~100 /0.1%]
012 Wait Time [ 0~100 / 100 /0.1%]
013 Norm:1C
014 Norm:FC
Hot Roller Fusing Lamp
015 At Reload [ 0~100 / 100 /0.1%]
016 Wait Time
Heating Roller: Fusing Lamp 2
017 At Reload [ 0~100 / 100 /0.1%]
To Next Page
Loading...
