Ricoh B132 - Page 525

SERVICE PROGRAM TABLES
SM 5-47 B132/B200
Service Tables
2307 Set Ptype Link Paper Type Link Setting
For the copy mode selected, these SPs 1) switch the image transfer bias for each
color and 2) switch the paper transfer and separation bias
001 Norm
002 Recycled Paper
003 Special Paper
004 Color 1
005 Color 2
006 OHP
007 Thick
008 Letterhead
009 Tab Sheet
010 Labels
011 Preprinted
012 Prepunched
013 Bond
014 Custom 1
015 Custom 2
016 Custom 3
[0~5/1]
0: Normal Paper
1: Thick Paper
2: OHP
3: Special Paper 1
4: Special Paper 2
5: Special Paper 3
2308 Set Psize Thresh Set Paper Size Thresholds
Sets the correction values (Threshold 1, 2, 3, 4) for paper size.
001 Thresh 1 [0~25-/1 mm]
002 Thresh 2 [0~25-/1 mm]
003 Thresh 3 [0~25-/1 mm]
004 Thresh 4 [0~25-/1 mm]
2312 Margin K Bias Margin K Bias: Setting
Full Speed: 52 to 128 g/m² (normal paper)
Half Speed: 128 to 256 g/m² (thick paper)
005 Full Spd:ITB
Sets the value of image transfer bias for K in the areas of
the image where nothing is printed.
[0~500/0.1]
006 Full Spd:PTR
[-100 to –6/1 µa]
007 Full Spd:SepDC
[0~100/0.1 µa]
008 Full Spd:SepAC [80~120/0.1 kV]]
009 Half Spd:ITB
[0~500/0.1 µa]
010 Half Spd:PTR
[-100~0/1 µa]
011 Half Spd:SepDC
[0~100/0.1 µa]
012 Half Spd:SepAC [80~120/0.1 kV]]