SERVICE PROGRAM TABLES
B132/B200 5-48 SM
2313 Margin FC Bias Margin FC Bias: Setting for K
This SP sets the image transfer bias for each in areas of the image where nothing
is printed in the full-color mode.
2314 Set ProCon Bias Process Control: Bias Setting for K
This SP sets the image transfer bias for each color during the process control self-
check.
2315 Set MUSIC Bias MUSIC Bias Setting
This SP sets the image transfer bias for each color during MUSIC.
Note:
Full Speed: 52 to 128 g/m² (normal paper)
Half Speed: 128 to 256 g/m² (thick paper)
2313 2314 2315
011 Full Spd:ITB:K
[0~500/0.1µa] [0~500/0.1µa] [0~500/0.1µa]
012 Full Spd:ITB:M
[0~500/0.1µa] [0~500/0.1µa] [0~500/0.1µa]
013 Full Spd:ITB:C
[0~500/0.1µa] [0~500/0.1µa] [0~500/0.1µa]
014 Full Spd:ITB:Y
[0~500/0.1µa] [0~500/0.1µa] [0~500/0.1µa]
016 Full Spd:PTR
[-6~0/1µa] [-6~0/1µa] [-6~0/1µa]
017 Full Spd:SepDC
[0~100/0.1µa] [0~100/0.1µa] [0~100/0.1µa]
018 Full Spd:SepAC
[80~120/0.1µa] [70~100/0.1µa] [80~120/0.1µa]
020 Half Spd:ITB:K
[0~500/0.1µa] [0~500/0.1µa] [0~500/0.1µa]
021 Half Spd:ITB:M
[0~500/0.1µa] [0~500/0.1µa] [0~500/0.1µa]
022 Half Spd:ITB:C
[0~500/0.1µa] [0~500/0.1µa] [0~500/0.1µa]
023 Half Spd:ITB:Y
[0~500/0.1µa] [0~500/0.1µa] [0~500/0.1µa]
025 Half Spd:PTR
[-100~0/1µa] [-100~0/1µa] [-100~0/1µa]
026 Half Spd:SepDC
[0~100/0.1µa] [0~100/0.1µa] [0~100/0.1µa]
027 Half Spd:SepAC [80~20/0.1kV] [80~20/0.1kV] [80~20/0.1kV]
2316 Pwr On Jam Bias Power On/Jam Recovery: Bias Setting
Sets the image development bias to be applied for each color after recovery from a
paper jam at power on.
002 ITB:K
[0 to 50/0.1 µA]
003 ITB:M
004 ITB:C
005 ITB:Y
007 PTR
2381 Ptype K:LL Paper Type K: LL
This SP sets image transfer bias for LL
(lowest) speed during black-and-white
copying in areas where black is used to develop the image.
006 Full Spd:ITB [10~250/1%]
011 Half Spd:ITB [10~250/1%]
To Next Page
Loading...
