Ricoh B132 - Page 534

SERVICE PROGRAM TABLES
B132/B200 5-56 SM
2506 Set Bias:Thk:FC Set Bias for Thick Paper: FC
This SP sets the following items with printing full-color on thick paper: 1) the image
transfer bias for the drum to ITB image transfer for each color, 2) the ITB image to
paper transfer, 3) dc/ac paper separation voltages for both sides duplex sheets.
001 ITB:K
[0~500/0.1 µA]
002 ITB:M
[0~500/0.1 µA]
003 ITB:C
[0~500/0.1 µA]
004 ITB:Y
[0~500/0.1 µA]
013 Side1:PTR
[-100~0/1 µA]
014 Side1:SepDC
[0~100/0.1 µA]
015 Side1:SepAC [80~120/0.1 kV
021 Side2:PTR
[-100~0/1 µA]
022 Side2:SepDC
[0~100/0.1 µA]
023 Side2:SepAC [80~120/0.1 kV
2511 Size Coeff:Thk Size Correction Coefficient: Thick Paper
These settings 1) apply to thick paper sizes wider than the paper size of 2308 001
Threshold 1, 2) apply to image areas only, 3) apply to thick paper mode (1/2 speed:
128 to 256 g/m²).
007
Side1:Size１:PTR
[100~600/1%]
012
Side2:Size１:PTR
2512 Size Coeff:Thk Size Correction Coefficient: Thick Paper
These settings 1) apply to above 2308 002 Threshold 2, and below SP2308 003
Threshold 3, 2) apply to image areas only, 3) apply to thick paper mode (1/2 speed:
128 to 256 g/m²).
007 Side1:Size2:PTR [100~600/1%]
012 Side2:Size2:PTR [100~600/1%]
2513 Size Coeff:Thk Size Correction Coefficient: Thick Paper
These settings 1) apply to above 2308 003 Threshold 3, and less than SP2308 002
Threshold 2, 2) apply to image areas only, 3) apply to thick paper mode (1/2 speed:
128 to 256 g/m²).
007 Side1:Size3:PTR [100~600/1%]
012 Side2:Size3:PTR [100~600/1%]
2514 Size Coeff:Thk Size Correction Coefficient: Thick Paper
These settings 1) apply to above 2308 004 Threshold 4, and less than SP2308 003
Threshold 3, 2) apply to image areas only, 3) apply to thick paper mode (1/2 speed:
128 to 256 g/m²).
007 Side1:Size4:PTR [100~600/1%]
012 Side2:Size4:PTR [100~600/1%]