Ricoh B132 - Page 533

SERVICE PROGRAM TABLES
SM 5-55 B132/B200
Service Tables
2441 Norm:FC:LL Plain Paper: FC Low
2442 Norm:FC:ML Plain Paper: FC Medium Low
2443 Norm:FC:MM Plain Paper: FC Medium Medium
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2441 – Up to SP2304 001: Threshold 1
SP2442 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2443 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3
These settings apply 1) only where the image is created in full-color on plain paper
at full speed.
SP2441 SP2442 SP2443
017 Side1:PTR [10~250/1%] [10~250/1%] [10~250/1%]
018 Side1:SepDC [10~250/1%] [10~250/1%]
019 Side1:SepAC [10~250/1%] [10~250/1%]
027 Side2:PTR [10~250/1%] [10~250/1%]
028 Side2:SepDC [10~250/1%] [10~250/1%]
029 Side2:SepAC [10~250/1%] [10~250/1%]
2444 Norm:FC:MH Plain Paper: FC Medium High
2445 Norm:FC:HH Plain Paper: FC High
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2444 – More than SP2304 003 Threshold 3, up to SP2304 004 Threshold 4
SP2445 – More than SP2304 004 Threshold 4
These settings apply 1) only where the image is created in black (in either black-
and-white or full-color mode) on plain paper.
SP2444 SP2445
017 Side1:PTR [10~250/1%] [10~250/1%]
018 Side1:SepDC [10~250/1%] [10~250/1%]
019 Side1:SepAC [10~250/1%] [10~250/1%]
027 Side2:PTR [10~250/1%] [10~250/1%]
028 Side2:SepDC [10~250/1%] [10~250/1%]
029 Side2:SepAC [10~250/1%] [10~250/1%]
2501 Set Bias:Thk:K Set Bias for Thick Paper: K
This SP sets the image transfer bias for the drum to ITB image transfer at the black
PCU when using thick paper and printing in black-and-white mode.
001 ITB
[-100~0/1 µA]
007 Side1:PTR
[0~100/0.1 µA]
008 Side1:SepDC
[0~100/0.1 µA]
009 Side1:SepAC
[80~120/0.1 µA]
012 Side2:PTR
[-100~0/1 µA]
013 Side2:SepDC
[0~100/0.1 µA]
014 Side2:SepAC
[80~120/0.1 µA]