SERVICE PROGRAM TABLES
B132/B200 5-54 SM
2431 Norm:K:LL Plain Paper: K Low
2432 Norm:K:ML Plain Paper: K Medium Low
2433 Norm:K:MM Plain Paper: K Medium
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2431 – Up to SP2304 001: Threshold 1
SP2432 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2433 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3
These settings apply 1) only where the image is created in black (in either black-
and-white or full-color mode) on plain paper at full speed.
2431 2432 2433
007 Side1:PTR [10~250/1%] [10~250/1%] [10~250/1%]
008 Side1:SepDC [10~250/1%] [10~250/1%]
009 Side1:SepAC [10~250/1%] [10~250/1%]
012 Side2:PTR [10~250/1%] [10~250/1%]
013 Side2:SepDC [10~250/1%] [10~250/1%]
014 Side2:SepAC [10~250/1%] [10~250/1%]
2434 Norm:K:MH Plain Paper: K Medium High
2435 Norm:K:HH Plain Paper: K High
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2434 – More than SP2304 003 Threshold 3, up to SP2304 004 Threshold 4
SP2435 – More than SP2304 004 Threshold 4
These settings apply 1) only where the image is created in black (in either black-
and-white or full-color mode) on plain paper.
SP2432 SP2432
007 Side1:PTR [10~250/1%] [10~250/1%]
008 Side1:SepDC [10~250/1%]
009 Side1:SepAC [10~250/1%]
012 Side2:PTR [10~250/1%]
013 Side2:SepDC [10~250/1%]
014 Side2:SepAC [10~250/1%]
To Next Page
Loading...
