EasyManua.ls Logo

Ricoh B132 - Page 541

Ricoh B132
1079 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SERVICE PROGRAM TABLES
SM 5-63 B132/B200
Service Tables
2631 OHP:K:LL Transparency: K Low
2632 OHP:K:ML Transparency: K Medium Low
2633 OHP:K:MM Transparency: K Medium
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304 001.
SP2631 – Up to SP2304 001: Threshold 1
SP2632 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2633 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3.
SP2634 – More than 2304 003 Threshold 3, up to SP2304 004 Threshold 4.
SP2635 – More than 2304 004 Threshold 4
These settings apply only to the image area printed on OHP in black-and-white
mode at half-speed (128~256 g/m
2
).
2631 2632 2633
002 PTR [10~250/1%] [10~250/1%] [10~250/1%]
003 SepDC [10~250/1%] [10~250/1%] [10~250/1%]
004 SepAC [10~250/1%] [10~250/1%] [10~250/1%]
2634 OHP:K:MH Transparency: K Medium High
2635 OHP:K:HH Transparency: K High
2634 2635
002 PTR
[10~250/1%] [10~250/1%]
003 SepDC
[10~250/1%] [10~250/1%]
004 SepAC
[10~250/1%] [10~250/1%]
2641 OHP:FC:LL Transparency: FC Low
2642 OHP:FC:ML Transparency: FC Medium Low
2643 OHP:FC:MM Transparency: FC Medium
2644 OHP:FC:MH Transparency: FC Medium High
2645 OHP:FC:HH Transparency: FC High
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304 001.
SP2631 – Up to SP2304 001: Threshold 1
SP2632 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2633 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3.
SP2634 – More than 2304 003 Threshold 3, up to SP2304 004 Threshold 4.
SP2635 – More than 2304 004 Threshold 4
These settings apply only to the image area printed on OHP in full-color mode at
half-speed (128~256 g/m
2
).
2641 2642 2643
007 PTR [10~250/1%] [10~250/1%] [10~250/1%]
008 SepDC [10~250/1%] [10~250/1%] [10~250/1%]
009 SepAC [10~250/1%] [10~250/1%] [10~250/1%]
2644 2645
007 PTR [10~250/1%] [10~250/1%]
008 SepDC [10~250/1%] [10~250/1%]
009 SepAC [10~250/1%] [10~250/1%]

Table of Contents

Related product manuals