Ricoh B132 - Page 555

SERVICE PROGRAM TABLES
SM 5-77 B132/B200
Service Tables
2881 Sp3:K:LL Special Paper 3: K Low
2882 Sp3:K:ML Special Paper 3: K Medium Low
2883 Sp3:K:MM Special Paper 3: K Medium
These SPs set the paper size correction coefficient for the image to paper transfer
bias threshold values calculated based on the reading of the absolute humidity from
the temperature/humidity sensor and the thresholds set with SP2304.
SP2881 – Up to SP2304 001: Threshold 1
SP2882 – More than SP2304 001 Threshold 1, up to SP23204 002 Threshold 2.
SP2883 – More than SP2304 002 Threshold 2, up to SP2304 003 Threshold 3.
SP2884 – More than 2304 003 Threshold 3, up to SP2304 004 Threshold 4.
SP2885 – More than 2304 004 Threshold 4
These settings apply only to the image area printed on Special Paper 3 in black-
and-white mode.
2881 2882 2883
007 Side1:PTR [10~250/5%] [10~250/5%] [10~250/5%]
008 Side1:SepDC [10~250/5%]
009 Side1:SepAC
012 Side2:PTR [10~250/5%] [10~250/5%]
013 Side2:SepDC [10~250/5%] [10~250/5%]
014 Side2:SepAC
2884 Sp3:K:MH Special Paper 3: K Medium High
2885 Sp3:K:HH Special Paper 3: K High
2884 2885
007 Side1:PTR
008 Side1:SepDC
[10~250/5%] [10~250/5%]
009 Side1:SepAC [10~250/5%] [10~250/5%]
012 Side2:PTR
013 Side2:SepDC
014 Side2:SepAC
[10~250/5%] [10~250/5%]