Fax Option Installation
D629 4 SM
8. Reattach the controller cover [A] ( x2).
9. Connect the telephone cord to the "LINE 1" jack.
10. Attach the Super G3 decal [A].
11. Attach the Fax decal under the function key on the operation panel.
12. Plug in the machine and turn on the main power switch.
After you turn the machine on, if you see a message that tells you the SRAM has
been formatted due to a problem with SRAM, turn the machine off and on again to
clear the message.
13. Enter the "User Tools" mode and set date and time.
14. Do SP3102 in the fax SP mode and enter the serial number for the fax unit.
15. Enter the correct country code with SP1101-016 (NCU Country/Area Code Setting).
Rev. 11/15
To Next Page
Loading...
