Scanner Unit
Type 5002
(D641)
1.3.5 IEEE 802.11A/G OR G (D377)
Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at one time: (IEEE 802.11a/g, g
(Wireless LAN), IEEE1284, Bluetooth).
1. Remove the slot cover [A] from the board slot (
x 2).
2. Install the wireless LAN board (Knob-screw x 2) into the board slot.
3. Make sure that the machine can recognize the option. (
p.30 "Check All Connections")
4. Peel off the double-sided tapes on the Velcro fasteners [A], and then attach them [B] at the
front left and rear right of the machine.
5. Attach the "ANT1" (having a black ferrite core) to the front left of the machine.
6. Attach the "ANT2" (having a white ferrite core) to the rear right of the machine.
To Next Page
Loading...
