Installing Controller Options
D641 26 SM
Installation
1. Check the software version.
2. If necessary, update the firmware to the required version.
3. Turn off the main switch.
4. Remove the controller cover [A] (
x 2)
5. Insert the IPDS SD Card into Slot 1 (Upper Slot) [A].
Pushing in the SD Card releases it for removal. Make sure the SD Card is inserted
and locked in place. If it is partially out of the slot, push it in gently until it locks in
place.
6. Reattach the controller cover and turn ON the main switch.
To Next Page
Loading...
