Scanner Unit
Type 5002
(D641)
7. Do one of the following ("A" or "B") to enable the IPDS function.
A. [Enable the IPDS function via telnet]
1. Connect the machine via telnet.
2. Execute the following commands:
msh> set ipds up
***If you want to stop the function.
msh> set ipds down
B. [Enable the IPDS option via WebImageMonitor]
1. Log in to WebImageMonitor.
2. Change the setting to enable IPDS.
8. Attach the decal [A] as shown in the photo above.
Line up the left side of the decal with the left edged of the main power switch. ([B]: 10 mm
or more)
To Next Page
Loading...
