Main SP Tables-1
D129/D130 5-8 SM
023
Feed Waiting: Plain Turns the feed waiting mode on or off for
each paper type.
[0 to 1 / 0 / 1]
0=Off, 1=On
The paper waits at the registration roller
until the fusing temperature reaches the
prescribed temperature (adjustable with
SP1105-028 to -37).
If you enable this feature, also set SP
1105-38 to a convenient value for the
customer.
024
Feed Waiting: M-Thick
025
Feed Waiting: Thick 1
026
Feed Waiting: Thick 2
027
Feed Wait: Center Minus: Plain
Adjusts the offset value for each re-load
temperature to exit the feed waiting
mode.
[0 to 60 / 0 / 1 deg]
029
Feed Wait: Ends Minus: Plain
030
Feed Wait: Center Minus: M-Thick
031
Feed Wait: Ends Minus: M-Thick
032
Feed Wait: Center Minus: Thick 1
033
Feed Wait: Ends Minus: Thick 1
034
Feed Wait: Center Minus: Thick 2
035
Feed Wait: Ends Minus: Thick 2
036
Feed Wait: Center Minus: Thin
037
Feed Wait: Ends Minus: Thin
038
Feed Waiting: Maximum Time
Sets the maximum feed waiting time.
[0 to 30 / 0 / 1 sec]
The paper is fed when the time specified
with this SP has passed even though the
fusing temperature has not reached the
prescribed temperature.
0: Disabled.
To Next Page
Loading...
