Turn on or off the paper size confirmation pop-up on the LED. This pop-up
prevents mismatching between a paper size selected by the operation
panel and an actual paper size on the by-pass tray.
[0 or 1 / 0 / -]
0: Off, 1: On
5104* A3/DLT Double Count (SSP)
Specifies whether the counter is doubled for A3/DLT. "Yes" counts except
from the bypass tray. When "Yes" is selected, A3 and DLT paper are
counted twice, that is A4 x2 and LT x2 respectively.
5113* Optional Counter Type
001
Default Optional Counter Type
Selects the type of counter:
0: None
1: Key Card (RK3, 4) Japan only
2: Key Card Down
3: Pre-paid Card
4: Coin Rack
5: MF Key Card
11: Exp. Key Card (Add)
12: Exp. Key Card (Deduct)
002
External Optional Counter Type
Enables the SDK application. This lets you select a number for the external
device for user access control.
Note: "SDK" refers to software on an SD card.
[0 to 3 / 0 / 1]
0: None
1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
To Next Page
Loading...
