Tables
5114* Optional Counter I/F
001
MF Key Card Extension
Use this SP and change the setting to "1" only when the "5" (MF Key Card)
is selected with SP5113-001.
[0: Not installed/ 1: Installed (scanning accounting)]
5118*
Disable Copying
Temporarily denies access to the machine. Japan Only
[0 to 1 / 0 / 1]
0: Release for normal operation [Default]
1: Prohibit access to machine
5120*
Mode Clear Opt. Counter Removal
Selects if mode clear is done for an optional counter when an optional
counter is removed.
0: Yes. (Always mode clear)
1: StandBy. (Mode clear before/after a job)
2: No. (No mode clear)
5121*
Counter Up Timing
Determines whether the optional key counter counts up at paper feed-in or
at paper exit.
[0 to 1 / 0 / 1 ]
0: Feed, 1: Exit
5126*
F Size Original Setting
Selects F size original setting.
[0 to 2 / 0 / 1 step]
0: 8 1/2 x 13 (Foolscap)
1: 8 1/4 x 13 (Folio)
2: 8 x 13 (F)
To Next Page
Loading...
