Main SP Tables-5
D129/D130 5-44 SM
5127*
APS Mode
Selects whether the APS function is enabled or disabled with the contact of
a pre-paid card or coin lock.
0: Disable (APS active) [Default], 1: Enable (APS not active)
5131*
Paper Size Type Selection
Selects the paper size (type) for both originals and copy paper.
[0 to 2 / - / 1 step]
0: Japan, 1: North America, 2: Europe
After changing the setting, turn the copier off and on. If the paper size of the
archive files stored on the HDD is different, abnormal copies could result.
5150
Bypass Length Setting
Sets up the by-pass tray for long paper.
[0 to 1 / 0 / 1]
0: Off [Default]
1: On. Sets the tray for feeding paper up to 600 mm long.
With this SP selected on, paper jams are not detected in the paper path.
5162*
App. Switch Method
Determines whether the application screen is switched with a hardware
switch or software switch.
0: Soft Key Set
1: Hard Key Set
5167*
Fax Printing Mode at Optional Counter Off
Enables or disables the automatic print out without an accounting device.
This SP is used when the receiving fax is accounted for by an external
accounting device.
0: Automatic printing
1: No automatic printing
To Next Page
Loading...
