Main SP Tables-6
D129/D130 5-110 SM
013 Fan Motor
6009
ADF FreeRun
Performs an ARDF free run in duplex mode. Press [ON] to start, press [OFF]
to stop.
Note: This is a general free run controlled from the copier.
001
Free Run: Stamp Motion
6010*
ADF Stamp Position Adjust. [–5 to 5 / 0 / 0.1 mm step]
Adjusts the horizontal position of the stamp on the scanned originals.
6016*
Original Size Detect Setting
Specifies the original size for a size detected by the original sensor, since
original sensors cannot recognize all sizes.
(7) 0000 0000 (0)
Different bits are used for detection, depending on the location as shown
below.
Bit Size Location
7 A4 (L)/LT (L)
Japan only
6 11" x 15"/DLT (L)
5 DLT (L)/ 11" x 15"
NA only
4 LT (S)/ US Exec (S)
3 LT (L)/ 8" x 10" (L)
2 LG (L)/ F4 (L)
1 A4 (L)/ 16K (L)
EU/AA only
0 8K (L)/ DLT (L)
To Next Page
Loading...
