Ricoh D129 - Page 525

Service Call Conditions
D129/D130 6-36 SM
-71 -
Finisher Tray 1 shift motor error
The shift roller HP sensor of the upper tray does not activate within the
prescribed time after the shift tray starts to move toward or away from the
home position.
The 1st detection failure issues a jam error, and the 2nd failure issues this
SC code.
 Shift tray HP sensor of the upper tray disconnected, defective
 Shift tray motor of the upper tray disconnected, defective
 Shift tray motor of the upper tray overloaded due to obstruction
-72 -
Shift jogger motor 1 error
The side fence does not retract within the prescribed time after the shift
jogger motor 1 switches on.
The 1st detection failure issues a jam error, and the 2nd failure issues this
SC code.
 Shift jogger motor 1 disconnected, defective
 Shift jogger motor 1 overloaded due to obstruction
 Shift jogger 1 HP sensor disconnected, defective
-73 -
Shift jogger motor 2 error
The side fence does not retract within the prescribed time after the shift
jogger motor 2 switches on.
The 1st detection failure issues a jam error, and the 2nd failure issues this
SC code.
 Shift jogger motor 2 disconnected, defective
 Shift jogger motor 2 overloaded due to obstruction
 Shift jogger 2 HP sensor disconnected, defective