Ricoh D129 - Page 524

Service Call Conditions
SM 6-35 D129/D130
Trouble-
shooting
-60 -
Booklet stapler motor error 1
The 1st detection failure causes a jam error, and the 2nd failure causes this
SC code.
The front stapler unit saddle-stitch motor does not start operation within the
specified time.
 Motor overload
 Loose connection of the front stapler motor
 Defective front stapler motor
-61 -
Booklet staple motor error 2
The 1st detection failure causes a jam error, and the 2nd failure causes this
SC code.
The rear stapler unit saddle-stitch motor does not start operation within the
specified time.
 Motor overload
 Loose connection of the rear stapler motor
 Defective rear stapler motor
-70 -
Tray lift motor error
The 1st detection failure causes a jam error, and the 2nd failure causes this
SC code.
The upper tray paper height sensor does not change its status with the
specified time after the tray raises or lowers.
 Motor overload
 Loose connection of the tray lift motor
 Defective tray lift motor