Ricoh D129 - Page 527

Service Call Conditions
D129/D130 6-38 SM
722 B 1000-Sheet Finisher Error
-10 -
Upper transport motor error
The upper transport motor in the finisher is not operating.
 Upper transport motor drive is obstructed (jammed paper, paper scraps,
etc.)
 The motor harness is loose or broken
 Upper transport motor defective
-14 -
Lower transport motor error
The lower transport motor in the finisher is not operating.
 Lower transport motor drive is obstructed (jammed paper, paper scraps,
etc.)
 The motor harness is loose or broken
 Lower transport motor defective
-17 -
Exit motor error
The exit motor in the finisher is not operating.
 Exit motor drive is obstructed (jammed paper, paper scraps, etc.)
 The motor harness is loose or broken
 Exit motor defective
-24 -
Finisher exit guide plate motor error
The exit guide plate HP sensor did not activate within the prescribed time
after the exit guide plate motor turned on.
 Finisher exit guide plate motor drive is obstructed (jammed paper, paper
scraps, etc.)
 Exit guide plate motor harness loose, broken
 Exit guide plate HP sensor harness loose, broken
 Exit guide plate motor defective
 Exit guide plate HP sensor defective