shooting
873 B
HDD mail send data error
An error is detected on the HDD immediately after the machine has been
turned on, or power has been turned off while the machine has used the
HDD.
1. Do SP5832-008 (Format HDD – Mail TX Data) to initialize the HDD.
2. Replace the HDD
874 D
Delete All error 1: HDD
A data error is detected for the HDD/NVRAM after the Delete All option has
been used.
Note: The source of this error is the DataOverwriteSecurity Unit running from
an SD card.
1. Turn the main switch off/on and try the operation again.
2. Install the DataOverwriteSecurity Unit again. For more, see "Installation".
3. HDD defective
875 D
Delete All error 2: Data area
An error occurs while the machine deletes data from the HDD.
Note: The source of this error is the DataOverwriteSecurity Unit (D362)
running from an SD card.
-001 An error occurs in hddchack-i.
-002 Failed to delete data from the HDD.
-003
Turn the main switch off/on and try the operation again
To Next Page
Loading...
