Ricoh D129 - Page 551

Service Call Conditions
D129/D130 6-62 SM
876 D
Log Data Error
An error is detected in the handling of the log data at power on or during
machine operation. This can be caused by switching the machine off while it
is operating.
-01 -
Log Data Error 1
 Damaged log data file in the HDD
Initialize the HDD with SP5832-004.
-02 -
Log Data Error 2
 HDD encryption unit not installed
1. Ask the customer's administrator to disable the HDD encryption setting
with a user tool.
2. Install the HDD encryption unit.
-03 -
Log Data Error 3
 Invalid log encryption key due to defective NVRAM data
1. Initialize the HDD with SP5832-004.
2. Ask the customer's administrator to disable the HDD encryption setting
with a user tool.
-04 -
Log Data Error 4
 Unusual HDD encryption function due to defective NVRAM data
Initialize the HDD with SP5832-004.
-05 -
Log Data Error 5
 Installed a NVRAM or HDD which was used in another machine
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
-99 -
Log Data Error 99
 Other than the above causes
Ask your supervisor.