shooting
995 D CPM setting error
-01 -
Defective BCU
NVRAM Replacement error
1. Install the previous NVRAM.
2. Input the serial number with SP5811-003, and turn the main power
switch off/on.
-02 -
Defective NVRAM
Defective controller
1. Update the controller firmware.
2. Install a new NVRAM, and turn off and on the main power switch after
SC995-002 has occurred.
-03 -
Incorrect type controller installed
Defective controller
1. Replace the controller with the correct type.
-04 -
Incorrect model controller installed.
1. Replace the controller with the correct model.
997 B
Software Error 3: Cannot select application function
An application does not start after the user pushed the correct key on the
operation panel.
Software bug
A RAM or DIMM option necessary for the application is not installed
or not installed correctly.
To Next Page
Loading...
