Service Call Conditions
D158/D159/D160/D161/D170 5-44 SM
SC No. Level Error Name/Error Condition/Major Cause/Solution
Check HDD connection.
Format the HDD.
If there is a problem with the HDD, it has to be replaced.
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC860-00 B HDD startup error at main power on (HDD error)
The HDD is connected but the driver detected the following
errors.
SS_NOT_READY:/* (-2)HDD does not become
READY*/
SS_BAD_LABEL:/* (-4)Wrong partition type*/
SS_READ_ERROR:/* (-5)Error occurred while reading
or checking the label*/
SS_WRITE_ERROR:/* (-6)Error occurred while writing
or checking the label*/
SS_FS_ERROR:/* (-7)Failed to repair the filesystem*/
SS_MOUNT_ERROR:/* (-8)Failed to mount the
filesystem*/
SS_COMMAND_ERROR:/* (-9)Drive not responding to
command*/
SS_KERNEL_ERROR:/* (-10)Internal kernel error*/
SS_SIZE_ERROR:/* (-11)Drive size too small*/
SS_NO_PARTITION:/* (-12)The specified partition
does not exist*/
SS_NO_FILE:/* (-13)Device file does not exist*/
Attempted to acquire HDD status through the driver but
there has been no response for 30 seconds or more.
Unformatted HDD
Label data corrupted
HDD defective
Format the HDD through SP mode.
Rev. 01/16/2014
To Next Page
Loading...
