Ricoh D158 - Page 461

Main SP Tables-1
SM Appendix 3-3 D158/D159/D160/D161/D170
Appendix:
Service
Program
Mode Tables
014 By-pass: Thick *ENG
[-9 to 5 / 0 / 1 mm / step]
018 Duplex: Plain *ENG
[-9 to 5 / 0 / 1 mm / step]
019 Duplex: Middle Thick *ENG
[-9 to 5 / 0 / 1 mm / step]
020 Duplex: Thick *ENG
[-9 to 5 / 0 / 1 mm / step]
1007
[By-pass Size Adjust]
0: LT SEF
1: LG
002
Bypass:1
(Bypass Size Adj)
*ENG
[0 or 1 / 0 / 1/step]
1101
[Flicker Control] (D158/D159)
[Inrush Control] (D160/D161/D170)
Enables or disables the Flicker Control.
001
Flicker Control
(Inrush Control)
*ENG
[0 or 1 / 0 / 1 / step]
0: Disable
1: Enable
1103
[Reload Permit Setting] (D158/D159)
[Reload Setting] (D160/D161/D170)
Specifies the settings of the reload permit for cold temperature in color mode.
001
0:OFF 1:ON 2:OFF+Temp
(Set1)
*ENG
[0 to 2 / 0 / 1 / step]
0:OFF
1:ON
2:OFF+Temp
002
Reload: Temp: Center
(Temp:Cen)
*ENG
[100 to 150 / 125 / 1 deg / step]
003
Reload Temp: Ends
(Temp:Ends)
*ENG
[100 to 150 / 125 / 1 deg / step]