Ricoh D158 - Page 470

Main SP Tables-1
D158/D159/D160/D161/D170 3-12 SM Appendix
026
High:1st CPM:25
(D160/D161/D170)
*ENG
[10 to 100 / 50 / 1 % / step]
027
High:2nd CPM:25
(D160/D161/D170)
*ENG
[10 to 100 / 50 / 1 % / step]
028
High:3rd CPM:25
(D160/D161/D170)
*ENG
[10 to 100 / 50 / 1 % / step]
1152
[Fusing Nip Band Check]
Checks and adjusts the nip of the hot roller and pressure roller.
001 0:OFF, 1:ON ENG
[0 or 1 / 1 / 1 / step]
002 Pre-idling Time *ENG
[0 to 999 / 300 / 1 sec / step]
003 Stop Time *ENG
[0 to 100 / 20 / 1 sec / step]
1159
[Fusing Jam Detection] (D158/D159)
[Fusing Jam SC] (D160/D161/D170)
This SP mode detects SC559. Set this SP mode to ‘Yes’ if the machine
experiences paper jam problems on a continual basis.
001
SC Display
(Fusing Jam SC)
*ENG
[0 to 1 / 0 / 1 / step]
1801
[MotorSpeedAdjust]
Adjusts the speeds of each motor.
001
MainMonitor:122 *ENG
[-4.00 to 4.00 / 0.00 / 0.01 % / step]
Adjusts the speed of main motor.
002
MainMonitor:100
(D158/D159)
*ENG
[-4.00 to 4.00 / 0.00 / 0.01 % / step]
Adjusts the speeds of main motor.
010 Duplex:Low (D158/D159) *ENG
[-4.0 to 4.0 / 0.0 / 0.1 % / step]