Ricoh D158 - Page 471

Main SP Tables-1
SM Appendix 3-13 D158/D159/D160/D161/D170
Appendix:
Service
Program
Mode Tables
Directly reflects the adjusted value.
011
Duplex:High (D158/D159) *ENG
[-4.0 to 4.0 / 0.0 / 0.1 % / step]
Directly reflects the adjusted value
024
Reverse:Low (D158/D159) *ENG
[-4.0 to 4.0 / 0.0 / 0.1 % / step]
Directly reflects the adjusted value
029
Reverse:High (D158/D159) *ENG
[-4.0 to 4.0 / 0.0 / 0.1 % / step]
Directly reflects the adjusted value
1902
[Zero Cross] (D160/D161/D170)
It reflects the number of zero-c
ross interrupted times that has beed measured
when frequency is determined.
More than 11 times: 60Hz
Less than 10 times: 50Hz
Less than 3 times: SC547
001
Count Value ENG
[0 to 255 / 0 / 1 / step]
1903
[Feed Cl Re-energize]
Directly reflects the adjusted value.
 A "+" setting increases the amount of driving.
 A “-” setting decreases the amount of driving.
001
By-pass Feed *ENG
[-10 to 10 / 0 / 1 mm / step]
002
Tray1 Feed *ENG
[-10 to 10 / 0 / 1 mm / step]
003
Tray2/3/4
(Other Teays)
*ENG
[-10 to 10 / 0 / 1 mm / step]