Ricoh D158 - Page 487

Main SP Tables-2
SM Appendix 3-29 D158/D159/D160/D161/D170
Appendix:
Service
Program
Mode Tables
2802
[Developer Mixing] (D158/D159)
[Force DevlpChurn] (D160/D161/D170)
001
- ENG
[- / - / -]
[Execute]
Initializes the developer and checks the TD sensor output (Vt). The machine
mixes the developer for 2 minutes while reading and displaying the Vt value.
The machine does not initialize the TD sensor output. If the machine has not
been used for a long period, prints may have a dirty background. In a case like
this, use this SP to mix the developer. The message "Completed" is displayed
when the program ends normally.
2803 [Developer Initialization Date] (D158/D159)
001
Vtref *ENG
[0.00 to 9.99 / 2.50 / 0.01 vol / step]
Vtref value at the completion of the initial agent configuration
002
ID Sensor PWM Value *ENG
[0 to 1023 / 0 / 1 /step]
ID sensor PWM value at the time of completion of the initial agent configuration