Service
Program
Mode Tables
2908
[Forced Toner Supply] (D158/D159)
[Force Toner Supp] (D160/D161/D170)
001
Number of Sheets
(Force Toner Supp)
ENG
[- / - / -]
[Execute]
Supplies the toner to the development unit. The processing stops under either
of the following conditions:
The toner density in the development unit reaches the standard level.
The processing has continued for 2 minutes.
2915 [Polygon Rotate Timing] (D158/D159)
001
Idling Time ADJ *ENG
[0 to 60 / 15 / 1 sec / step]
Adjusts the polygon motor idling time.
002
Post Idling Time ADJ *ENG
[0 to 60 / 15 / 1 sec / step]
Adjusts the post idling time
2915 [Polygon Idling] (D160/D161/D170)
001
Polygon Idling *ENG
[0 to 2 / 1 / 1 / step]
Adjusts the polygon motor idling time.
2921 [Toner Supply Mode]
001
Mode Select
(Toner Supply Mode)
*ENG
[0 to 3 / 0 / 1 / step]
0:Normal1
1:Normal2
2:Fixed1
3:Fixed2
To Next Page
Loading...
