Service
Program
Mode Tables
5507
[Supply Alarm] (D158/159)
Enables or disables the notifying a supply call via the @Remote.
001 Paper Supply Alarm *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
003
Toner Supply Alarm *CTL
[0 or 1 / 1 / 1/step]
0: OFF, 1: ON
If you select "1" the alarm will sound when the copier detects toner end.
080 Toner Call Timing *CTL
Changes the timing of the "Toner
Supply Call" via the @Remote, when
the following conditions occur.
[0 or 1 / 0 / 1/step]
0: At replacement
1: At near end
128 Interval :Others *CTL
[250 to 10000 / 1000 / 1page/step]
The "Paper Supply Call Level: nn"
SPs specify the paper control call
interval for the referenced paper
sizes.
132 Interval :A3 *CTL
133 Interval :A4 *CTL
134 Interval :A5 *CTL
141 Interval :B4 *CTL
142 Interval :B5 *CTL
160 DLT *CTL
166 Interval :LT *CTL
172 Interval :HLT *CTL
To Next Page
Loading...
