Main SP Tables-5
D158/D159/D160/D161/D170 3-156 SM Appendix
111
Secondary srv IP address *CTL
[000.000.000.000 to 255.255.255.255
/ - / 1/step]
Sets the IP address for the secondary capture server. This is basically
adjusted by the remote system.
112
Secondary srv scheme *CTL
[0 to 6 char / NULL / -/step]
This is basically adjusted by the remote system.
113
Secondary srv port number *CTL
[1 to 65535 / 80 / 1/step]
This is basically adjusted by the remote system.
114
Secondary srv URL path *CTL
[0 to 16 char / - / 1/step]
This is basically adjusted by the remote system.
120
Default Reso Rate Switch *CTL
[0 or 1 / 0 / 1/step]
This is basically adjusted by the remote system.
122
Reso: Copy(Mono) *CTL
[0 to 255 / 3 / 1/step]
Selects the resolution for BW copy mode. This is basically adjusted by the
remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
124
Reso: Print(Mono) *CTL
[0 to 255 / 3 / 1/step]
Selects the resolution for BW print mode. This is basically adjusted by the
remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
125
Reso: Fax(Color) *CTL
[0 to 255 / 4 / 1/step]
Selects the resolution for color fax mode. This is basically adjusted by the
remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
126
Reso: Fax(Mono) *CTL
[0 to 255 / 3 / 1/step]
Selects the resolution for BW fax mode. This is basically adjusted by the
remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
To Next Page
Loading...
