Ricoh D158 - Page 615

Main SP Tables-5
SM Appendix 3-157 D158/D159/D160/D161/D170
Appendix:
Service
Program
Mode Tables
127
Reso: Scanner(Color) *CTL
[0 to 255 / 4 / 1/step]
Selects the resolution for color scanning mode. This is basically adjusted by
the remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
128
Reso: Scanner(Mono) *CTL
[0 to 255 / 3 / 1/step]
Selects the resolution for BW scanning mode. This is basically adjusted by
the remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
141
All Addr Info Switch *CTL
[0 or 1 / 1 / 1/step]
142
Stand-by Doc Max Number *CTL
[10 to 10000 / 2000 / 1/step]
5840 [IEEE 802.11] (D158/159)
006
Channel Max *CTL
[1 to 14 / 11 (NA), 13 (EU), 14 (JPN) /
1/step]
Range
JPN: 1 to 14
NA: 1 to 11
EU: 1 to 13
Sets the maximum number of channels available for data transmission via the
wireless
LAN. The number of channels available varies according to location. The
default settings are set for the maximum end of the range for each area.
Adjust the upper 4 bits to set the maximum number of channels.
 Do not change the setting.