Service
Program
Mode Tables
5846 [UCS Settings] (D158/159)
001
Machine ID (for Delivery
Server)
*CTL
[- / - / -]
Displays the unique device ID in use by the delivery server directory. The
value is only displayed and cannot be changed. This ID is created from the
NIC MAC or IEEE 1394 EUI. The ID is displayed as either 6-byte or 8-byte
binary.
002
Machine ID Clear(for
Delivery Server)
*CTL
[- / - / -]
[Execute]
Clears the unique ID of the device used as the name in the file transfer
directory. Execute this SP if the connection of the device to the delivery
server is unstable. After clearing the ID, the ID will be established again
automatically by cycling the machine off and on.
003
Maximum Entries *CTL
[2000 to 20000 / 2000 / 1/step]
Changes the maximum number of entries that UCS can handle.
If a value smaller than the present value is set, the UCS managed data is
cleared, and the data (excluding user code information) is displayed.
006
Delivery Server Retry Timer *CTL
[0 to 255 / 0 / 1/step]
Sets the interval for retry attempts when the delivery server fails to acquire
the delivery server address book.
007
Delivery Server Retry
Times
*CTL
[0 to 255 / 0 / 1/step]
Sets the number of retry attempts when the delivery server fails to acquire
the delivery server address book.
008
Delivery Server Maximum
Entries
*CTL
[2000 to 20000 / 2000 / 1/step]
Sets the maximum number account entries of the delivery server user
information managed by UCS.
To Next Page
Loading...
