Main SP Tables-5
D158/D159/D160/D161/D170 3-166 SM Appendix
010
LDAP Search Timeout *CTL
[1 to 255 / 60 / 1/step]
Sets the length of the timeout for the search of the LDAP server.
020
WSD Maximum Entries *CTL
[5 to 250 / 250 / 1/step]
Sets the maximum entries for the address book of the WSD (WS-scanner).
021 Folder Auth Change *CTL
[0 or 1 / 0 / 1/step]
0: Login User, 1: Destination
040
Addr Book
Migration(USB->HDD)
*CTL
[- / - / -]
[Execute]
041
Fill Addr Acl Info *CTL
[- / - / -]
[Execute]
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD
automatically.
5. However, at this point the address book can be accessed by only the
system administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes
successfully, any user can access the address book.
To Next Page
Loading...
