Main SP Tables-5
SM Appendix 3-183 D158/D159/D160/D161/D170
Service
Program
Mode Tables
5907 [Plug & Play Maker/Model Name] (D158/159)
001
Plug & Play
Maker/Model/Name
*CTL See detail below
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time.
When the setting is completed, the beeper sounds five times.
5907
[Plug & Play] (D160/D161/D170)
Selects the brand name and production name for the Plug and Play function.
These names are stored in the NVRAM. When the NVRAM data is corrupted,
select these names once again. Use the right-arrow or left-arrow key to scroll
through the list of brand names. To select a brand name, press the OK key. An
asterisk (*) indicates which manufacture is currently selected.
001 Plug & Play *ENG
[0 to 19 / 0 / 0 / step]
5908 [LCT Paper Size] (D158/159)
001
0: A4 1: LT *CTL
[0 or 1 / 1 / 1 / step]
Specifies the paper size in the LCT.
5913 [Switchover Permission Time] (D158/159)
002
Print Application Timer *CTL
[3 to 30 / 3 / 1sec/step]
Sets the amount of time to elapse while the machine is in standby mode (and
the operation panel keys have not been used) before another application can
gain control of the display.
5919 [State Of Encryption] (D158/159)
001
State Of Encryption *CTL
[0 or 1 / 0 / 1/step]
0: OFF (Not working)
1: ON (Working)
To Next Page
Loading...
