Ricoh D158 - Page 675

System SP Tables-8
SM Appendix 3-217 D158/D159/D160/D161/D170
Appendix:
Service
Program
Mode Tables
8201
T:LSize Scan PGS
(D158/D159)
*CTL
[0 to 9999999 / 0 / 1]
8203
F Lsize Scan PGS
(D158/D159)
*CTL
[0 to 9999999 / 0 / 1]
8205
S:LSize Scan PGS
(D158/D159)
*CTL
[0 to 9999999 / 0 / 1]
These SP codes count the total number of large pages input with the scanner
for scan jobs only. Large size paper (A3/DLT) scanned for fax transmission are
not counted.
Note: These counters are displayed in the SMC Report, and in the User Tools
display..
8221
ADF Org Feeds *CTL
[0 to 9999999 / 0 / 1]
These SPs count the number of pages fed through the ADF for front and back
side scanning.
001 Front
Number of front sides fed for scanning:
With an ADF that can scan both sides
simultaneously, the Front side count is the same as
the number of pages
fed for either simplex or duplex
scanning.
With an ADF that cannot scan both sides
simultaneously, the Front side count is the same as
the number of pages fed for duplex front side
scanning. (The front side is determined by which
side the user loads face up.)
002 Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides
simultaneously, the Back count is the same as the
number of pages fed for duplex scanning.
With an ADF that cannot scan both sides
simultaneously, the Back count is the same as the
number of pages fed for duplex rear-side scanning.