Ricoh D158 - Page 676

System SP Tables-8
D158/D159/D160/D161/D170 3-218 SM Appendix
 When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
 If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
8281
T:Scan PGS/TWAIN
(D158/D159)
*CTL
These SPs count the number of pages
scanned using a TWAIN driver. These
counters reveal how the TWAIN driver is
used for delivery functions.
[0 to 9999999 / 0 / 1]
Note: At the present time, these counters
perform identical counts.
8285
S:Scan PGS/TWAIN
(D158/D159)
*CTL
8291
T:Scan PGS/Stamp
(D158/D159)
*CTL
These SPs count the number of pages
stamped with the stamp in the ADF unit.
[0 to 9999999 / 0 / 1]
The L: counter counts the number of
pages stored from within the document
server mode screen at the operation
panel, and with the Store File button from
within the Copy mode screen
8293
F:Scan PGS/Stamp
(D158/D159)
*CTL
8295
S:Scan PGS/Stamp
(D158/D159)
*CTL
8301
T:Scan PGS/Size
(D158/D159)
*CTL
[0 to 9999999 / 0 / 1]
These SPs count by size the total number of pages scanned by all applications.
Use these totals to compare original page size (scanning) and output (printing)
page size [SP 8-441].
8302
C:Scan PGS/Size
(D158/D159)
*CTL
[0 to 9999999 / 0 / 1]
These SPs count by size the total number of pages scanned by the Copy
application. Use these totals to compare original page size (scanning) and
output (printing) page size [SP 8-442].
8303
F:Scan PGS/Size
(D158/D159)
*CTL
[0 to 9999999 / 0 / 1]