TYPE M1
(D702)
Code Meaning Suggested Cause/Action
15-14 Mail Header Format Error The mail header is not standard format.
For example, the Date line description is
incorrect.
15-15 Mail Divide Error The e-mail is not in standard format.
There is no boundary between parts of the
e-mail, including the header.
15-16 Mail Size Receive Error The mail cannot be received because it is
too large.
15-17 Receive Timeout May occur during manual receiving only
because the network is not operating
correctly.
15-18 Incomplete Mail Received Only one portion of the mail was received.
15-31 Final Destination for Transfer
Request Reception Format
Error
The format of the final destination for the
transfer request was incorrect.
15-39 Send/Delivery Destination
Error
The transmission cannot be delivered to the
final destination:
Destination file format is incorrect.
Could not create the destination for the file
transmission.
15-41 SMTP Receive Error Reception rejected because the
transaction exceeded the limit for the
“Auth. E-mail RX” setting.
15-42 Off Ramp Gateway Error The delivery destination address was
specified with Off Ramp Gateway OFF.
15-43 Address Format Error Format error in the address of the Off
Ramp Gateway.
15-44 Addresses Over The number of addresses for the Off
Ramp Gateway exceeded the limit of 30.
15-50 NFAX: Text part-related error Check the received mail.
Update the software.
15-60 NFAX: FIFF file-related error Check the TIFF file attached to the mail
Update the software.
15-61 Attachment File Format Error The attached file is not TIFF format.
To Next Page
Loading...
