Ricoh D158 - Page 876

Error Codes
D702 34 SM
Code Meaning Suggested Cause/Action
14-51 UCS Destination Download
Error
Not even one return notification can be
downloaded:
 The address book was being edited.
 The number for the specified destination
does not exist (it was deleted or edited
after the job was created).
14-60 Send Cancel Failed  The cancel operation by the user failed to
cancel the send operation.
14-61 Notification Mail Send Failed
for All Destinations
 All addresses for return notification mail
failed.
14-62 Transmission Error due to the
existence of zero line page
 When the 0 line page exists in received
pages with G3 communication, the
transmission is interrupted.
15-01 POP3/IMAP4 Server Not
Registered
 At startup, the system detected that the IP
address of the POP3/IMAP4 server has
not been registered in the machine.
15-02 POP3/IMAP4 Mail Account
Information Not Registered
 The POP3/IMAP4 mail account has not
been registered.
15-03 Mail Address Not Registered  The mail address has not been registered.
15-10 DCS Mail Receive Error  Error other than 15-11 to 15-18.
15-11 Connection Error The DNS or POP3/IMAP4 server could not be
found:
 The IP address for DNS or POP3/IMAP4
server is not stored in the machine.
 The DNS IP address is not registered.
 Network not operating correctly.
15-12 Authorization Error POP3/IMAP4 send authorization failed:
 Incorrect IFAX user name or password.
 Access was attempted by another device,
such as the PC.
 POP3/IMAP4 settings incorrect.
15-13 Receive Buffer Full  Occurs only during manual reception.
Transmission cannot be received due to
insufficient buffer space. The buffer is
being used for mail send or
Scan-to-Email.