Bit Switches - 1
D702 68 SM
System Switch 1A (SP No. 1-101-027)
No Function Comments
0
to
7
LS RX memory capacity
threshold setting
00-FF (0-1020 Kbyte: Hex)
Sets the value to x4KB. When the amount of
available memory drops below this setting, RX
documents are printed to conserve memory.
Initial setting 0x80 (512 KB)
If a customer wants available memory
size to be larger, decrease this
threshold.
System Switch 1D (SP No. 1-101-030)
No Function Comments
0
RTI/CSI/CPS code display
0: Enable
1: Disable
0: RTI, CSI, CPS codes are displayed on
the top line of the LCD panel during
communication.
1: Codes are switched off (no display)
System Switch 1E (SP No. 1-101-031)
No Function Comments
0
Communication after the
Journal data storage area has
become full
0: Impossible
1: Possible
0: When this switch is on and the journal
history becomes full, the next report prints. If
the journal history is not deleted, the next
transmission cannot be received. This
prevents overwriting communication records
before the machine can print them.
1: If the buffer memory of the communication
records for the Journal is full, fax
communications are still possible. But the
machine will overwrite the oldest
communication records.
This setting is effective only when
Automatic Journal printout is enabled
but the machine cannot print the
report (e.g., no paper).
To Next Page
Loading...
