and Adjustment
Use pliers to pinch the linking part in order to separate.
6. Duplex Entrance Sensor [A] (
x1, Hook)
4.11.5 REGISTRATION ROLLER (DRIVEN)
1. Drive Unit (page 4-26 "Drive Unit")
2. Gear Unit (page 4-26 "Gear Unit")
3. Paper Size Detection Switch (page 4-45 "Paper Size Detection Switch")
4. Registration Sensor (page 4-51 "Registration Sensor")
5. HVPS with bracket (page 4-66 "HVPS with Bracket")
6. Release the bearing [A] ×1 at the left end of the registration roller (drive) and fixing
plate[B] ×1. (
x1, ×2)
7. Release the bearing at the right end of the registration roller (drive), and remove the
grounding plate [A]. (
x 1, x 1)
To Next Page
Loading...
