and Adjustment
Area code Destination
5 Asia
6 China
7 Korea
14. Turn the main power switch off and on.
15. In accordance with SMC data, input the UP and SP mode settings.
4.12.8 HDD
Before HDD Replacement
1. Insert an SD card in SD card slot 2 (lower slot).
2. Go into the SP mode.
3. Do SP5-846 51 to upload the address book data to the SD card.
Replacement Procedure
For details about the replacement procedure, see page 2-51 "Hard Disk Drive Option Type M6" in
2, "Installation".
If the HDD is damaged, you may not be able to retrieve this data from the HDD.
After HDD Replacement
1. When you turn the main power switch on after installing the hard disk, initialization of
the disk starts automatically.
2. Go into the SP mode.
3. Do SP5-846-52 to restore the address book data to the HDD.
Never remove a used HDD unit from the work site (even if it is suspected of being
damaged) without the consent of the client.
The HDD must remain with the customer for disposal or safe keeping.
The HDD may contain proprietary or classified (Confidential, Secret) information.
Specifically, the HDD contains document server documents and data stored in temporary
files created automatically during copy job sorting and jam recovery. Such data is stored
on the HDD in a special format, so it cannot normally be read but it can possibly be
recovered with illegal methods.
To Next Page
Loading...
