OCR Unit Type M2
M160/M161 2-46 SM
SP 5-878-004 links the SD card and the machine in the first execution, and then
copies the OCR dictionary to the HDD in the second execution.
8. Turn off the main power switch, and then remove the SD card form the SD card slot.
9. Re-attach the SD card slot cover.
10. Turn on the main power switch.
11. Press [Send Settings] on the [Scanner] screen.
12. Press [File Type], and then press [PDF File Type].
13. Check if [OCR Settings] is displayed on the [PDF File Type] screen.
Keep the empty card in place by, for example, affixing it near the SD card slot with
adhesive tape.
You can switch the searchable PDF function on and off in the [OCR Settings] screen after
installing the OCR unit.
If you want to use the searchable PDF function, select [On] for [OCR Settings]. (Default:
[Off])
Restoration Procedure
When you install the OCR Unit Type M2, the searchable PDF function is saved on the HDD and
the SD card ID is saved in NVRAM.
Therefore, you need to re-install the OCR Unit Type M2 after replacing the HDD or NVRAM.
When the original SD card exists
When you replace the HDD
Re-install the OCR Unit Type M2 from the original SD card.
When you replace the NVRAM
If you upload / download the NVRAM data, re-install the OCR Unit Type M2 from the
original SD card.
If you don’t upload / download the NVRAM data, order a new SD card (service part) of the
OCR Unit Type M2. Then re-install the OCR Unit Type M2 from the new SD card.
When you replace the HDD and NVRAM at the
same time
Re-install the OCR Unit Type M2 from the original SD card.
To Next Page
Loading...
