Main Machine Installation
M160/M161 2-16 SM
Loading Paper
1. Check that paper in the paper tray is not being used, and then pull out the paper tray
carefully. Adjust the paper size dial to match the size and feed direction of the paper in
the paper tray.
2. Pull the tray carefully until it stops, lift the front side of the tray, and then pull it out of
the machine.
3. Squeezing the releases on the side and end paper guides, adjust the guides’ positions
according to the size of paper to be loaded.
4. Load the paper, insert the tray while keeping its front slightly raised, and then push it in
all the way in.
To Next Page
Loading...
